PROBLEMS OF DESIGNING DUST CLEANING EQUIPMENT IN THE INDUSTRY
https://doi.org/10.23947/2541-9129-2018-1-2-2-12
Abstract
The work is devoted to design technology of centrifugal dust collectors using an experimental installation for cyclone parallel comparative tests. Currently, there is no single criterion for choosing the optimal form of cyclone, but in the most modern construction, the tendency of development of its cone part is becoming clearer. Between the geometric shape of the cyclones
and their effectiveness, there are a number of connections, which appear through the complex aerodynamics of the flows in the apparatus. The
identification and study of the relationship between the design parameters of cyclone apparatus with their aerodynamic characteristics and effective dust collection is the subject of this study.
About the Authors
Yu. I. Bulygin
Don State Technical University
Russian Federation
Russian Federation
Professor of Department of life Safety and environmental protection of the Don State Technical University
N. N. Azimova
Don State Technical University
Russian Federation
Russian Federation
senior Lecturer, Don State Technical University
I. S. Kuptsova
postgraduate student, Don State Technical University
Russian Federation
Russian Federation
postgraduate student, Don State Technical University
References
1. Potemkina, V A., Lukash, E.S. Teoreticheskie i eksperimental’nye issledovaniya vliyaniya glubiny pogruzheniya vykhlopnogo patrubka na aero-dinamicheskie svoystva i effektivnost’ tsiklonnykh apparatov. [Theoretical and experimental researches of the influence of immersion depth of the exhaust pipe on the aerodynamic properties and efficiency of cyclone apparatus.] Vestnik of DSTU, 2010, vol. 10, no. 4 (47), pp. 526-533 (in Russian).
2. Buligin, Y. et al. Features of Velocity and Pressure Fields Formation in the Centrifugal Dust Collector. Applied Mechanics and Materials, 2014, vol. 698, pp. 542-545.
3. Meskhi, B. et al. Cyclone with Controlled Pa-rameters and Self-Emptying Bin for Air Dedusting in Machine Building Plants. Applied Mechanics and materials, 2014, vol. 682, pp. 46-52.
4. Meskhi, B.C. et al. Pyleulavlivatel’: patent 2506880 Ros. Federatsiya: A47L 9/16/ [Dust collec-tor.] Patent RF, no. 2012155164/12, 2014 (in Russian).
5. Meskhi, B.C. et al. Ustanovka dlya pyleu-lavlivaniya: patent 2557741Ros. Federatsiya: A47L 9/16/ [Installation for dust collection.] Patent RF, no. 2014136881/12, 2015 (in Russian).
6. Legkonogikh, A.N. et al. Issledovanie aero-dinamiki tsentrobezhnykh pyleuloviteley. [The study of aerodynamics of centrifugal dust collectors.] No-vye standatry modernizatsii pedagogicheskogo obra-zovaniya v formirovanii zdorovogo obraza zhizni i bezopasnosti zhiznedeyatel’nosti: mat-ly III region. nauch.-prakt. konf. Yuzhnogo federal'no’o okruga. [New standards of modernization of pedagogical ed-ucation in the formation of healthy lifestyle and safe-ty: proc. of III region. sci.-pract. conf. of the South-ern Federal District.] Krasnodar: IPTS KubGU, 2015, p. 41-45 (in Russian).
7. Buligin, Y.I. et al. Physical and Theoretical Models of Heat Pollution Applied to Cramped Con-ditions Welding Taking into Account the Different Types of Heat. IOP Conference Series: Earth and Environmental Science, 2017, vol. 66, is. 1, no. 012015. Available at: http://iopscience.iop. org/issue/1755-1315/66/1.
8. Pirumov, A.I. Obespylivanie vozdukha. [Cleaning air from dust.] Moscow: Stroyizdat, 1974, 296 p. (in Russian).
9. Padva, V.Yu. Optimal’nye usloviya ulavlivaniya pyli tsiklonami. [Optimal conditions for dust collection by cyclones.] Vodosnabzhenir i sani-tarnaya tekhnika, 1968, no. 4, pp. 6-10 (in Russian).
10. Bulygin, Yu.I. et al. Eksperimental’nye ustanovki dlya issledovaniya vliyaniya formy i ge-ometrii konstruktsii tsentrobezhnykh pyleuloviteley na ikh aerodinamicheskie kharakteristiki i effek-tivnost’ pyleulavlivaniya. [Experimental installation to study the effect of shape and geometry of the structure of centrifugal dust collectors on their aero-dynamic characteristics and the efficiency of dust collection.] Novye napravleniya modernizatsii peda-gogicheskogo obrazovaniya v formirovanii zdo-rovogo obraza zhizni i bezopasnosti zhizned-eyatel’nosti: mat-ly V region. nauch.-prakt. konf. Yuzhnogo federal’nogo okruga. [Modern directions of modernization of pedagogical education in the formation of healthy lifestyle and safety: proc. of V regional sci.-pract. conf. of the Southern Federal Dis-trict.] Krasnodar: IPTS KubGU, 2017, P. 200 (in Russian).
11. Meskhi, B.Ch. Tsiklon s reguliruemymi par-ametrami i samorazgruzhaemym bunkerom dlya obespylevaniya vozdukha mashinostroitel’nykh predpriyatiy. [Cyclone with adjustable parameters and a self-unloading hopper for cleaning air of ma-chine-building enterprises from dust.] Innovatsii, ekologiya i resursosberegayushchie tekhnologii: mat-ly XI mezhdunar. nauch.-tekhn. foruma. [Innova-tions, ecology and resource-saving technologies: proc. XI international sci.-tech. forum.] Rostov-on-Don: Izd-vo DSTU, 2014, pp 170-179 (in Russian).
12. Testo 521/526. Rukovodstvo pol’zovatelya. "Testo-Rus" [Testo 521/526. User manual. "Testo-Rus"] Moscow: "Testo-Rus", 2016, 52 p. (in Rus-sian).
13. Programmnoe obespechenie ComSoft 3.4. Rukovodstvo pol’zovatelya. Rossiyskoe otdelenie Testo AG. [Software ComSoft 3.4. User manual. Russian branch of Testo AG.] Moscow: "Testo-Rus", 2016, 14 p. (in Russian).
14. Bulygin, Yu.I., Vardanyan, M.V., Kuptsova, I.S. Modernizatsiya eksperimental’nykh ustanovok dlya sravnitel’nykh parallel’nykh ispytaniy tsen-trobezhnykh pyleuloviteley. [Modernization of ex-perimental facilities for comparative parallel testing of centrifugal dust collectors.] Povyshenie mezhdu-narodnoy konkurentosposobnosti rossiyskoy inno-vatsionnoy produktsii i tekhnologiy predpriyatiy Rostovskoy oblasti: sb. nauch. tr. I mezhdunar. nauch.-prakt. konf. Pod red. Yu.K. Verchenko. [In-crease the international competitiveness of Russian innovative products and technologies of the enter-prises of the Rostov region: proc. of I international. sci.-pract. conf. ed. by Verchenko, Yu.K.] Rostov-on-Don: Izd-vo DSTU, 2016, pp. 28-33. Available at: http://ерцир.рф/images/erciir /podrazdeleniya/region-inginir-centr/materialy/sbornik-forum-2016.pdf (in Russian).
15. Legkonogikh, A.N. et al. Primenenie standartnoy k-ε modeli turbulentnosti k opisaniyu aerodinamicheskikh protsessov vnutri tsiklonnykh apparatov. [The application of the standard k-ε turbu-lence model to the description of aerodynamic pro-cesses inside cyclone devices.] Nauchno-tekhnicheskie problem stroitel’stva i tekhnosfernoy bezopasnosti: sb. nauch. tr. In-ta sfery obsluzhivani-ya i predprinimatel’stva (filial) DGTU. [Scientific and technical problems of construction and techno-sphere safety: coll. of sci. works of the Institute of service sector and entrepreneurship (branch) DSTU.] Shakhty: ISOPiP (branch) DSTU, 2015, pp. 72-77 (in Russian).
Review
For citations:
Bulygin Yu.I., Azimova N.N., Kuptsova I.S. PROBLEMS OF DESIGNING DUST CLEANING EQUIPMENT IN THE INDUSTRY. Safety of Technogenic and Natural Systems. 2018;(1-2):2-12. (In Russ.) https://doi.org/10.23947/2541-9129-2018-1-2-2-12
Views:
200
Email this article 