Preview

Safety of Technogenic and Natural Systems

Advanced search

EXPERIMENTAL STUDY OF THE WORKING ZONE AIR QUALITY OF THE WELDER WORKING IN SEMI-OPEN SPACES OF LIMITED VOLUME

Abstract

The article raises the problem of experimental study of the emission of harmful substances and the heat distribution in the welding process in
semi-open spaces for the purpose of subsequent verification of mathematical and computer models. In such production welder often works in the so-called cramped conditions, where there is a rapid increase in the content of harmful substances, working conditions are further worsened by high heat radiation and uncomfortable body position of the welder. The authors measured the concentrations of harmful
substances and carbon dioxide produced by oxyacetylene welding, and confirmed their hypothesis of exceeding the sanitary maximum permissible concentration standard (MPC). Similar studies on the temperature of the
working area proved that the welder works under adverse conditions of production microclimate.

About the Authors

B. Ch. Meskhi
Don State Technical University
Russian Federation


D. A. Koronchik
Don State Technical University
Russian Federation


J. I. Bulygin
Don State Technical University
Russian Federation


J. S. Cherevan
Don State Technical University
Russian Federation


M. N. Strekoz
Don State Technical University
Russian Federation


References

1. Gaidenko A.L., Sitnikov A.N., Bulygin Y.I., Koronchik D.A., Alekseenko L.N. Modelirovanie teplomassoperenosa zagryazneniy prisvarochnykh rabotakh v stesnennykh usloviyakh. [Simulation of heat and mass transfer of contaminants in the process of welding in cramped conditions.] Fundamental’nye i

2. prikladnye issledovaniya v Rossii: problemy i perspektivy razvitiya: materialy II vserossiyskoy nauch.-praktich. konf. [Fundamental and applied research in Russia: problems and prospects: proc.

3. of II all-Russian scientific.-practical. conf.]— Rostov-on-Don, 2015, pp. 82-97 (in Russian).

4. Koronchik D.A. et al. Metodologiya i printsipy poiska resheniy, obespecheniya bezopasnosti raboty svarshchikov v stesnennykh usloviyakh i na trudnodostupnykh ob’ektakh. [Methodology and principles to find solutions that ensure the safe operation of welders in cramped conditions and difficult to access objects.] Vestnik DSTU,

5. , vol. 16, no. 3 (86), pp. 41-47 (in Russian).

6. Ustanovki atsetilenovye: GOST 12.2.054–81 [The acetylene installations: GOST 12.2.054–81] Vserossiyskiy nauchno-issledovatel’skyy institut

7. metrologicheskoy sluzhby, Federal’noe agenstvo po tekhnicheskomu regulirovaniyu i metrologii, Elektron. Fond pravovoy i normativ.-tekh. dokumentatsii, Konsortsium "Kodeks". [AllRussian research Institute of metrological service,

8. Federal Agency for technical regulation and Metrology, Electron. Fund of legal and norm.- tech. documentation, Consortium "Kodeks".] Available at: http: // docs.cntd.ru / document /1200012532 (accessed: 21.10.16) (in Russian).

9. Tishchenko N.F. Okhrana atmosfernogo

10. vozdukha. Raschet soderzhaniya vrednykh veshchestv i ikh raspredelenie v vozdukhe. [Protection of atmospheric air. Calculation of the content of harmful substances and their distribution in the air.] Moscow: Khimiya, 1991, 368 p. (in Russian).

11. Rykalin N. N. Raschety teplovykh protsessov pri svarke. [Calculations of thermal processes in welding.] Moscow: Mashinostroenie, 1951, 296 p. (in Russian).

12. Predel’no dopustimye kontesentratsii (PDK) vrednykh veshchestv v vozduhe rabochey zony: gigienichesskie normativy GN 2.2.5.2100-06]. [The maximum permissible concentration (MPC)

13. of harmful substances in the air of working zone: hygienic regulations GN 2.2.5.2100-06]. Vserossiyskiy nauchno-issledovatel’skyy institut metrologicheskoy sluzhby, Federal’noe agenstvo

14. po tekhnicheskomu regulirovaniyu i metrologii, Elektron. Fond pravovoy i normativ.-tekh. dokumentatsii, Konsortsium "Kodeks". [AllRussian research Institute of metrological service,

15. Federal Agency for technical regulation and Metrology, Electron. Fund of legal and norm.- tech. documentation, Consortium "Kodeks".]. Available at: http://docs.cntd.ru/document/

16. (accessed: 31.10.16) (in Russian).

17. Dvuokis ugleroda gazoobraznaya i zhidkaya. Tekhnicheskie usloviya: GOST 8050-85. [Gaseous and liquid carbon dioxide. Specifications: GOST 8050-85] Vserossiyskiy nauchno-issledovatel’skyy institut metrologicheskoy sluzhby, Federal’noe agenstvo po tekhnicheskomu regulirovaniyu i metrologii, Elektron. Fond pravovoy i normativ.-tekh. dokumentatsii, Konsortsium "Kodeks". [AllRussian research Institute of metrological service,

18. Federal Agency for technical regulation and Metrology, Electron. Fund of legal and norm.- tech. documentation, Consortium "Kodeks".] Available at: http: // docs.cntd.ru / document/gost–8050–85 (accessed: 31.10.16) (in Russian).

19. Grishagin V.M., Fedko V.T, Sapozhkov S.B. Sanitarno-gigienicheskie usloviya svarochnogo proizvodstva i ikh osobennostipri svarke v CO2.

20. [Sanitary and hygienic conditions of welding and their characteristics when welding in CO2.] Bezopasnosti’ zhiznedeyatel’nosti, 2001, no. 10,

21. pp. 25-34 (in Russian).

22. Nikolaev G.A. et al. Svarka v mashinostroenii. [Welding in mechanical engineering. Vol. 1.] Moscow: Mashinostroenie, 978, 504 p. (in Russian).


Review

For citations:


Meskhi B.Ch., Koronchik D.A., Bulygin J.I., Cherevan J.S., Strekoz M.N. EXPERIMENTAL STUDY OF THE WORKING ZONE AIR QUALITY OF THE WELDER WORKING IN SEMI-OPEN SPACES OF LIMITED VOLUME. Safety of Technogenic and Natural Systems. 2017;(1):4-17.

Views: 139


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2541-9129 (Online)