Lean production technology as an element of the professional risk management system of the enterprise
https://doi.org/10.23947/2541-9129-2019-4-9-12
Abstract
The article describes the methods of production management, providing, in addition to improving productivity, the normalization of harmful and dangerous factors of the working environment. By results of comparison of the main indicators of individual professional risk of the worker the interrelation between improvement of working conditions and introduction of lean production in foundry is proved. The conclusion is made about the efficiency of lean production methods in terms of professional risk management.
About the Author
V. V. Maslenskiy
Don state technical University
Russian Federation
Russian Federation
Maslenskiy Viktor Valeryevich, postgraduate student of "Life Safety and Environmental Protection» department
1, Gagarin sq., Rostov-on-Don, 344000, Russia
References
1. Vyalov, A.V. Berezhlivoe proizvodstvo: uchebnoe posobie. [Lean production: study guide.] Komsomolsk-on-Amur: KNAGTU, 2014, 100 p. (in Russian).
2. Volkova, N.V., Efimova, E.I., Smirnov, V.N. Berezhlivoe proizvodstvo v okhrane truda. [Lean production in labor protection.] Internet journal "Naukovedenie". Available at: https://naukovedenie.ru/PDF/96tvn313.pdf (accessed: 01.08.2019) (in Russian).
3. Esipov, Yu.V., Shchekina E.V., Maslenskiy, V.V. Postroenie logicheskoy modeli i otsenka vozmozhnostnoy mery realizatsii vershinnykh iskhodov v sisteme "pech’-otlivka-rabotnik". [Construction of a logical model and evaluation of a possible measure of realization of vertex outcomes in the system "furnace-casting-worker".] Innovatsii i inzhiniring v formirovanii investitsionnoy privlekatel’nosti re-giona: sb. nauch.tr. II Otkrytogo mezhdunar. nauch.-prakt. foruma. [Innovations and engineering in the formation of investment attractiveness of the region: proc. II Open internat. sci.- pract. forum.] Rostov-on-Don, 2017, pp. 161-164 (in Russian).
4. Shchekina, E.V., Maslenskiy, V.V. Otsenka individual’nogo professional’nogo riska na primere rabotnika professii "Zemledelets". [Assessment of individual professional risk on the example of an em-ployee of the profession "Farmer".] Grani nauki-2018: sb. tr. mezhdunar. nauch.-prakt. konf. [Science edges–2018: proc. internat. sci.-pract. conf.] Rostov-on-Don, 2018, pp. 35-40 (in Russian).
5. Shchekina, E.V., Maslenskiy, V.V. Otsenka individual’nogo riska dlya rabotnikov liteynogo proizvodstva na osnove metodiki rascheta veroyatnosti utraty rabotnikom trudosposobnosti v zavisimosti ot sostoyaniya usloviy truda na rabochem meste. [Assessment of individual professional risk to foundry workers on the basis of calculation method of loss of work capacity probability of the worker depending on the state of working labor conditions at the workplace.] Young Researcher of the Don, 2018, no. 4 (13), pp. 170-179 (in Russian).
6. Esipov, Yu.V., Shchekina, E.V., Maslenskiy, V.V. Primenenie logiko-vozmozhnostnogo metoda dlya ekspress-otsenki veroyatnosti proisshestviya v mnogofaktornoy tekhnicheskoy sisteme stali-liteynogo tsekha. [Application of logical-and-possibility method for rapid assessment of accident proba-bility in multivariable technical system of steel foundry.] Safety of Technogenic and Natural Systems, 2018, no. 3-4, pp. 52-63 (in Russian).
7. Shchekina, E.V., Maslenskiy, V.V. Sravnitel’nyy analiz sostavlyayushchikh individual’nogo professional’nogo riska rabotnika do i posle vnedreniya berezhlivogo proizvodstva v liteynom tsekhe. [Comparative analysis of the components of individual professional risk to an employee before and after the introduction of lean production in the foundry.] Aktual’nye perspektivy razvitiya nauk-2018: sb.tr. mezhdunar. nauch.-prakt. konf. [Actual prospects of development of sciences-2018: proc. internat. sci.- pract. conf.] - Rostov-on-Don, 2018, pp. 33-39 (in Russian).
Review
For citations:
Maslenskiy V.V. Lean production technology as an element of the professional risk management system of the enterprise. Safety of Technogenic and Natural Systems. 2019;(4):9-12. https://doi.org/10.23947/2541-9129-2019-4-9-12
Views:
188
Email this article 