Preview

Safety of Technogenic and Natural Systems

Advanced search

Analysis of methods for processing and using by-products of the technological process of asphalt concrete component manufacturing

https://doi.org/10.23947/2541-9129-2021-1-76-80

Abstract

Introduction. Currently, the problem of disposal and recycling of industrial waste is extremely relevant. The article analyzes the economically feasible and environmentally friendly ways of the processing or using waste generated during the production of the asphalt concrete component — enriched mineral filler.
Problem Statement. The aim of the study was to find the most economically feasible and environmentally friendly ways to process or use waste generated during the production of enriched mineral filler at one of the enterprises of the Rostov region.
Theoretical Part. The paper considers the composition of the enriched mineral filler as the main product of production and a source of by-products, the technological process of its manufacture, as well as the composition of the resulting by-products to be disposed. Based on the results of these studies, the assessment of probable ways of waste disposal was performed and the optimal method of recycling was selected.
Conclusion. The choice of the most appropriate method of waste disposal from the production of mineral filler allows you to reduce the total amount of waste at the enterprise and significantly reduce the negative impact of the enterprise on the environment. To implement the proposed technology of mineral waste disposal, the relevant technical conditions and regulations are being developed.

About the Authors

V. V. Ozeryanskaya
Don State Technical University
Russian Federation

Ozeryanskaya, Viktoriya V., Associate professor, Department of Life Safety and Environmental Protection, Cand.Sci., Associate professor

1, Gagarin sq., Rostov-on-Don, RF, 344003



A. A. Repinskaya
Don State Technical University
Russian Federation

Repinskaya, Arina A., Master's degree student, Department of Life Safety and Environmental Protection

1, Gagarin sq., Rostov-on-Don, RF, 344003



R. R. Lazurenko
Don State Technical University
Russian Federation

Lazurenko, Robert R., Senior lecturer Department of Life Safety and Environmental Protection

1, Gagarin sq., Rostov-on-Don, RF, 344003



M. Yu. Seregin
Don State Technical University
Russian Federation

Seregin, Mikhail Yu., Senior lecturer, Department of Life Safety and Environmental Protection, Cand.Sci.

1, Gagarin sq., Rostov-on-Don, RF, 344003



References

1. Фаюстов, А. А. Утилизация промышленных отходов и ресурсосбережение. Основы, концепции, методы: монография / А. А. Фаюстов. — Москва; Вологда : Инфра-Инженерия, 2019. — 272 с.

2. Озерянская, В. В. Утилизация гальваноосадков в асфальтобетоны / В. В. Озерянская, И. Н. Лоскутникова // Известия вузов. Северо-Кавказский регион. Естественные науки. Приложение. — 2004. — № 6. — С. 84–87.

3. Касторных, Л. И. Оптимизация зернового состава заполнителя для мелкозернистого самоуплотняющегося бетона / Л. И. Касторных, В. Д. Черепанов, В. Э. Березовой // Молодой исследователь Дона. — 2020. — № 5(26). — С. 40–48.

4. Озерянская, В. В. Изучение и анализ природных сред, процессов и явлений / В. В. Озерянская, Б. Ч. Месхи, Р. Р. Лазуренко. — Ростов-на-Дону : Изд. центр ДГТУ. — 2017. — 149 с.

5. Репинская, А. А. Утилизация отходов от производства обогащённого минерального порошка / А. А. Репинская, Д. С. Долгов, В. В. Озерянская // Химия: достижения и перспективы: сб. науч. ст. по мат. V Всерос. науч.-практ. конф. студ. и молод. уч. — Ростов-на-Дону; Таганрог: Издательство ЮФУ, 2020. — С. 200–202.

6. Жовтенко, К. А. Анализ эффективности соблюдения природоохранного законодательства на территории Ростовской области / К. А. Жовтенко, О. В. Дымникова, К. А. Шаповалов // Безопасность техногенных и природных систем. — 2018. — № 1–2. — С. 95–107. DOI : https://doi.org/10.23947/2541-9129-2018-1-2-95-106

7. Ветошкин, А. Г. Техника и технология обращения с отходами жизнедеятельности: учебное пособие. В 2-х частях. Ч. 2. Переработка и утилизация промышленных отходов / А. Г. Ветошкин. — Москва : Инфра-Инженерия. — 2019. — 380 с.

8. Общая геология в курсах наук об окружающей среде / В. В. Озерянская, Б. Ч. Месхи, С. Н. Свирская, Р. Р. Лазуренко. — Ростов-на-Дону : Изд. центр ДГТУ. — 2012. — 228 с.

9. Соколов, Л. И. Управление отходами (waste management): учебное пособие / Л. И. Соколов. — Москва : Инфра-Инженерия. — 2018. — 208 с.

10. ГОСТ Р 52 129–2003 Порошок минеральный для асфальтобетонных и органоминеральных смесей. Технические условия. — Москва : Госстрой России, ФГУП ЦПП. — 2004.

11. Zarubin, V. S. Mathematical modeling of structural-sensitive nanocomposites deformation / V. S. Zarubin, E. S. Sergeeva // Computational Mathematics and Information Technologies. — 2018. — Vol. 2, № 1. — P. 17–24.

12. Приказ Федеральной службы по надзору в сфере природопользования от 22 мая 2017 г. №242 «Об утверждении Федерального классификационного каталога отходов» // Электронный фонд правовой и нормативно-технической документации : [сайт]. — URL : http://docs.cntd.ru/document/542600531 (дата обращения :12.12.2020).

13. Мелконян, Р. Г. Утилизация опасных отходов. Технология использования и утилизации опасных отходов: учебное пособие / Р. Г. Мелконян, Г. И. Панихин. — Москва : Издательский Дом МИСиС, 2018. — 105 c.

14. Карпинская, Т. А. Методы имитационного математического моделирования российского срочного рынка на современном этапе / Т. А. Карпинская, О. Е. Кудрявцев // Вестник Донского государственного технического университета. — 2019. — Т. 19, № 4. — С. 398–406.DOI : https://doi.org/10.23947/1992-5980-2019-19-4-398-406


Review

For citations:


Ozeryanskaya V.V., Repinskaya A.A., Lazurenko R.R., Seregin M.Yu. Analysis of methods for processing and using by-products of the technological process of asphalt concrete component manufacturing. Safety of Technogenic and Natural Systems. 2021;(1):76-80. https://doi.org/10.23947/2541-9129-2021-1-76-80

Views: 177


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2541-9129 (Online)