Calculation of collective risk of foundry professional groups based on the analysis of individual risk of each employee
https://doi.org/10.23947/2541-9129-2020-4-17-23
Abstract
Introduction. The article presents the technique of the definition of integral risk in the organization, on the basis of which the collective risk of several professional groups involved at the foundry is calculated.
Problem Statement. The purpose of this study is to calculate the collective risk in the foundry.
Theoretical Part. The initial data are the values of individual occupational risk of employees depending on their age, work experience, gender and disability, as well as the quality of working conditions, injury risk and susceptibility to the development of occupational diseases.
Conclusion. The results of the calculation indicate a high collective risk of professional groups of the foundry, which requires the development of corrective engineering or organizational measures.
About the Authors
V. V. Maslenskiy
Don State Technical University
Russian Federation
Russian Federation
Viktor V. Maslenskiy - Post-graduate student, Department of Life Safety and Environmental Protection, Don State Technical University.
1, Gagarin sq., Rostov-on-Don, 344003.
N. A. Lyubetskaya
Don State Technical University
Russian Federation
Russian Federation
Nadezhda A. Lyubetskaya - Master's degree student, Department of Life Safety and Environmental Protection, Don State Technical University.
1, Gagarin sq., Rostov-on-Don, 344003.
References
1. Merkulova E. V., Makushin V. P. Otsenka proizvodstvennogo riska i metody upravleniya im na predpriyatii mashinostroitel'nogo kompleksa [Assessment of production risk and methods of its management at the machine-building complex enterprise]. Auditorium. 2019;3(23):83-93 (In Russ.).
2. Esipov Yu. V., Shchekina E. V., Maslenskiy V. V. Primenenie logiko-vozmozhnostnogo metoda dlya ekspress-otsenki veroyatnosti proisshestviya v mnogofaktornoy tekhnicheskoy sisteme staleliteynogo tsekha [Application of logical-and-possibility method for rapid assessment of accident probability in a multivariable technical system of the steel foundry]. Safety of Technogenic and Natural Systems. 2018;3-4:52-63 (In Russ.).
3. Shchekina E. V., Maslenskiy V. V. Otsenka individual'nogo professional'nogo riska dlya rabotnikov liteynogo proizvodstva na osnove metodiki rascheta veroyatnosti utraty rabotnikom trudosposobnosti v zavisimosti ot sostoyaniya usloviy truda na rabochem meste [Assessment of individual occupational risk for foundry workers based on the method of calculating the probability of employee disability depending on the state of working conditions at the workplace]. Young Researcher of the Don. 2018;4(13):170-179 (In Russ.).
4. Sazonova A. M. Integral'naya otsenka usloviy truda pri stroitel'no-montazhnykh rabotakh v podzemnykh sooruzheniyakh [Integrated assessment of working conditions in the construction and installation works in underground structures]. Bulletin of Scientific Research Results. 2016;3-4(20-21):51-59 (In Russ.).
5. Lazarenkov A. M., Khoreva S. V. Klassifikatsiya rabochikh mest liteynogo proizvodstva po usloviyam truda [Purification of the heat-electric generating station flue gases of sulfur and nitrogen oxides]. Foundry production and metallurgy. 2009;3(52):92-98 (In Russ.).
6. Izmerov N. F., Prokoprnko L. V., Simonova N. I. et al. Metodika rascheta integral'nogo pokazatelya urovnya professional'nogo riska v organizatsii i individual'nogo professional'nogo riska v zavisimosti ot usloviy truda i sostoyaniya zdorov'ya rabotnika [Method for calculating the integral indicator of the level of professional risk in the organization and individual professional risk depending on the working conditions and health of the employee]. Klinskii institut okhrany i uslovii truda. Available from: http://www.kiout.ru/info/publish/216 (Accessed 10th October 2020) (In Russ.).
7. Maslenskiy, V. V. Tekhnologiya berezhlivogo proizvodstva kak element sistemy upravleniya professional'nymi riskami predpriyatiya [Lean production technology as an element of the professional risk management system of the enterprise]. Safety of Technogenic and Natural Systems. 2019;4:9-12 (In Russ.).
Review
For citations:
Maslenskiy V.V., Lyubetskaya N.A. Calculation of collective risk of foundry professional groups based on the analysis of individual risk of each employee. Safety of Technogenic and Natural Systems. 2020;(4):17-23. https://doi.org/10.23947/2541-9129-2020-4-17-23
Views:
389
Email this article 